SW Module Release Engineering 20-40万

Technical release recommendation of vehicle modules and vehicle systems (such as Driving Assistance System; Motor&Transmission; High Voltage Battery; Infotainment system; MO-Service; Mechatronics and Comfort) through vehicle durability and durability function oriented tests. Specific test instructions must be issued in order to be executed during the tests.

 

key task:

To get the agreement in some cases with VWAG test programs for specific modules
To plan the test program in a standard format, to control timing, to document deviations, and to report the status to project coordinators
To verify and to reproduce failures and findings reported by the stations in the car, in order to fully understand the nature of the findings
organize drives locally or to participate in winter or summer tests, if necessary to evaluate the modules under his/her responsibility
To ensure that the test instructions and test sequences are known and understood by the responsible of performing the tests
To fully understand the modules under his/her responsibility, to know the expected performance and functional and technical properties. These modules can be hardware (chassis, power train, electric, electronic or body components or systems) or software (infotainment, Motor&Transmission, ADAS, mechatronics, on line services, connectivity, HMI, high voltage, comfort electronics).
To analyze and to report the test results in a standard format, including technical release, findings, results, and conclusions 
To participate in meetings with areas of R&D to define test programs, timings, amount of samples, to give input for product improvement, etc.
To consider in the testing programs all capabilities of EG: test benches, structural durability tests, climatic chambers, measuring techniques, etc., and not only vehicle durability testing, so synergies and cost reductions can be found 
To understand and to analyze signals and traces from data loggers or instrumentation in order to get the failures solved
 

Qualification:

Master Degree in Electrical Engineering, Mechanical Engineering, Automotive Engineering, Mechatronics Engineering, or similar.
 3-5 years work experience in vehicle functional testing.
Team working and good analytical skills
Good technical communication skills in English (written and spoken), German language is desired

某大型汽车主机厂